Resources
Tech notes
Our R&D Center and FAEs write up the tips and fixes they gain from designing and testing with our suppliers’ chips
Tech notes
Lecture materials made by our R&D Center and FAEs, viewable right here. Filter by supplier or area
7 notes
-
PWM and servo motor control basics
Duty cycle and average voltage, timer-generated PWM (frequency, resolution, center-aligned mode), choosing the frequency, RC filtering to a voltage, MOSFET and H-bridge drive with dead time, how RC servos work and pulse-width control, power and wiring, and a debugging checklist, with six diagrams and four calculators (in Korean)
-
Audio ADC basics — sampling, quantization and dynamic range
How sound and speech become numbers — sample rate and aliasing, speech bandwidths, bit depth and quantization noise, sigma-delta ADCs, reading SNR, dynamic range and THD+N, gain staging from microphone to ADC, clock jitter, synchronization and echo cancellation, and a debugging checklist, with six diagrams and six calculators (in Korean)
-
MEMS microphone basics — analog and digital (PDM)
How MEMS microphones are built and work, analog versus digital (PDM) output, what the specs mean — sensitivity (dBV/dBFS), SNR, THD, AOP, dynamic range, PSRR and more — acoustic-path resonance, circuit design and a debugging checklist, with cross-section and PDM diagrams and five calculators (in Korean)
-
I2C bus basics
How the SCL/SDA open-drain bus works, speed modes, START, address, ACK and STOP, pull-up resistor sizing, clock stretching, stuck-bus recovery, level shifting and a debugging checklist — with transaction diagrams and address and pull-up calculators (in Korean)
-
I2S audio interface basics
I2S signals (SCK, WS, SD, MCLK), standard, left-justified, right-justified and TDM formats, clock calculation, digital MEMS microphones, PCB layout tips and a debugging checklist — with timing diagrams and a clock calculator (in Korean)
-
SPI bus basics
The four signals, modes 0–3 (CPOL/CPHA), transfer-time and maximum-clock calculation, connecting several devices, Dual/Quad SPI flash (SPI NOR and NAND), PCB layout tips and a debugging checklist — with timing diagrams for each mode and two calculators (in Korean)
-
UART serial communication basics
Frame structure (start, data, parity and stop bits), baud-rate error and clock choice, flow control, TTL, RS-232 and RS-485 physical layers, RS-485 wiring and direction control, and a debugging checklist — with a bit-waveform diagram and a baud-rate error calculator (in Korean)
No notes match your selection
About the series
- Written by
- Our Corporate R&D Center (certified in 2017) and FAEs
- How often
- Two a month
- Language
- Full text in Korean; English and Chinese titles and summaries
Topic areas
We only write about our suppliers’ chips and the technology our R&D Center actually works with. These are topic areas, not article titles
-
MCUs & firmware
8-, 16- and 32-bit MCU firmware, peripherals such as USB, CAN and LIN, and motor-control MCUs
-
Wireless connectivity
Designing with Bluetooth/BLE, Zigbee/IEEE 802.15.4, Thread and other wireless links
Related lines Atmosic Rafael Micro BES
-
Audio & voice recognition
Audio performance analysis, ANC tuning, voice tuning and recording, and misrecognition-rate testing
Related lines Nuvoton MEMSensing BES
-
Power, analog & protection
Power and analog circuit analysis, ESD and EMI protection, and choosing discretes
Related lines Nexperia IK Semicon DIT
-
Memory & storage
Choosing DRAM, NAND, eMMC, UFS and SSDs, and storage for industrial and automotive use
Related lines SK hynix SkyHigh Memory ATP
-
Displays, sensors & connectors
TFT LCD and touch integration, MEMS sensors, ToF depth cameras, and choosing connectors and terminal blocks
Related lines DISEA MEMSensing meerecompany HIROSE ANYTEK
-
Test, verification & production
System verification, debugging for mass production, and automotive development experience
How we write
-
Only what we have done
Our engineers write only about what they have designed and tested themselves, together with the test conditions
-
Supplier originals stay linked
We do not copy supplier datasheets or application notes; we link to the supplier’s official page where needed
-
No confidential data, no customer names
We never use unpublished supplier information or customer names
-
Kept on this site
Notes live on this site, not on an outside blog. They are written in Korean, with English and Chinese titles and summaries
Get tech notes by email
We will email you when a new note is published. Pick an area of interest and we will put those notes first