To make or import electronic products for sale in Korea, you need to check two regimes: radio conformity assessment for broadcasting and communications equipment, and electrical product safety. This page sets out only the basics we confirmed in official sources
The two regimes rest on different laws and agencies. One product may fall under both, so check each separately
This is not legal advice
This is a summary of material published by Korean authorities. Which assessment a product needs, and which tests apply, depend on the product. Please confirm with the National Radio Research Agency (RRA), a designated test laboratory or a safety certification body. Laws and notices may change
Last checked Based on the Radio Waves Act (in force January 2, 2026); the Notice on Conformity Assessment of Broadcasting and Communications Equipment (RRA Notice No. 2026-4, in force July 24, 2026); and the Electrical Appliances and Consumer Products Safety Control Act (in force October 1, 2025)
Radio — conformity assessment of broadcasting and communications equipment
Covers
Broadcasting and communications equipment, and equipment that causes electromagnetic interference or is affected by it
Types
Certification, registration, self-confirmation and interim certification
Law
Radio Waves Act, Art. 58-2
Agency
National Radio Research Agency (RRA); applications via the e-civil service center (emsit.go.kr)
Marking
The KC mark, an identification code and conformity information, on the product and its packaging
Electrical safety — electrical product safety control
Covers
Products used connected to AC or DC power, and their parts and accessories, in the categories the law designates
Types
Safety certification, safety confirmation and supplier’s declaration of conformity — per model
Law
Electrical Appliances and Consumer Products Safety Control Act
Agency
Korean Agency for Technology and Standards (KATS) Product Safety Information Center; safety certification bodies
Marking
The marking for the relevant scheme (KC mark) on the product or its packaging
Radio: four types of conformity assessment
Anyone who makes, sells or imports such equipment must obtain the applicable assessment below
Types of conformity assessment for broadcasting and communications equipment
Type
Procedure
For (examples given by RRA)
Basis (Radio Waves Act, Art. 58-2)
Conformity certification 적합인증
Testing at a designated lab → review by RRA → certificate
Equipment that may harm the radio environment or networks, or that causes or suffers serious electromagnetic interference. E.g. LTE mobile radio equipment, personal radio station equipment
para. 2
Conformity registration 적합등록
Testing at a designated lab → written confirmation of conformity → registration
Equipment not subject to certification. E.g. very-low-power radio devices, routers, household appliances, information equipment such as computers and monitors
para. 3
Self-confirmation of conformity 자기적합확인
Test in-house or at a designated or recognized lab → declaration → published on RRA’s website
Lower-risk equipment. E.g. USB- or battery-powered household appliances, lighting, measuring and test instruments
para. 4
Interim certification 잠정인증
Assessment against domestic or international standards → permitted with conditions such as region and validity period
New equipment with no criteria yet, or that is otherwise hard to assess. Once criteria exist, a full assessment is needed within the set period
paras. 9–10
Also worth knowing
Assessed equipment carries the conformity marking — the KC mark, an identification code and conformity information — on the product and its packaging
Conformity assessments have no fixed expiry; they stand until the holder withdraws them or the authority cancels them
Foreign approvals such as CE or FCC are not enough on their own; a Korean assessment is required. Under mutual recognition arrangements (MRAs), however, test reports from foreign labs approved by RRA are accepted like Korean ones. Partner economies and the test fields covered differ by country
Equipment with a limited purpose — testing, research, development or exhibitions — and equipment made only for export can be exempted in whole or in part (Radio Waves Act, Art. 58-3). For example, up to 1,500 units for research and development, 10 for testing and quality inspection, and 3 samples for market research; you must apply for confirmation of the exemption
Applications are filed through the e-civil service center, and assessed products can be looked up in RRA’s conformity assessment search
Finished products with a radio module
What the current notice says when you build a product around a Bluetooth or Zigbee chip or a radio module
What the notice means by a radio module
The notice defines a “radio transmitter/receiver component” as a part with RF oscillation, modulation or demodulation and amplification stages and an antenna (or antenna terminal), housed in a shielded enclosure or a chip, built into or mounted in a system as a single component, and not usable by consumers on its own
Notice, Art. 2(1)5
What paperwork can be skipped
Equipment fitted with an assessed radio component may omit the test reports and attachments already covered by that component’s assessment. Test reports for EMC, SAR, field strength and other criteria the product may affect must still be submitted. In a certification application, the circuit diagram may also leave out the component
Notice, Art. 22(1) and Art. 5(1)6
When the registration route applies
Equipment that is itself subject to registration and contains a radio component holding conformity certification may follow the registration procedure
Notice, Art. 8(3)
In short
Even with an assessed module, a finished product that is itself subject to assessment needs its own. This is often called “inheriting” the module certification, but what the notice actually provides is the document and procedure simplification above. Confirm how it applies to your product with a designated lab or RRA
Notice, Arts. 22 and 8
RRA’s FAQ on Bluetooth products
RRA’s FAQ states that products with a Bluetooth function are specified low-power radio devices (for wireless data communication systems) subject to certification, and that equipment to which the SAR criteria do not apply may instead be registered after testing at a designated lab. Check your product’s classification against Annex 1 of the notice and with a designated lab
Electrical safety: three schemes
Electrical products are managed under three schemes according to their level of risk. Manufacturers or importers go through the relevant scheme for each model
Electrical product safety schemes
Type
What it involves
Basis (Safety Control Act)
Safety certification 안전인증
Product testing and a factory audit by a certification body, followed by regular follow-up checks
Art. 5
Safety confirmation 안전확인
Product testing by a designated test body, then a report to the authority. No factory audit or regular inspection (introduced January 1, 2009)
Art. 15
Supplier’s declaration of conformity 공급자적합성확인
The maker or importer tests the product (or has a third party test it), confirms it meets the safety standard, then reports it
Art. 23
Which products fall under which scheme is listed on the Product Safety Information Center’s product lists
The certification bodies listed by the Product Safety Information Center are Korea Testing Laboratory (KTL), Korea Testing Certification Institute (KTC) and Korea Testing & Research Institute (KTR)
Certified or confirmed products, or their packaging, must carry the marking for the relevant scheme (Arts. 9, 18 and 25)
Common questions about parts and products
Answers confirmed in RRA’s FAQ and the current notice
Can we import and sell a product that someone else has already had assessed?
If the domestic or overseas manufacturer obtained the Korean assessment and marked the product, anyone may import and sell it without a new assessment. If someone other than the manufacturer obtained it, each importer needs its own
Source: RRA FAQ (scope)
Do we need a new assessment if we swap a component?
Changes to what was assessed must be reported, and changes related to the assessment criteria need an assessment for that part. The notice treats circuit changes and replacing, adding or removing components or parts as criteria-related. However, for EMC (the common criteria), replacing resistors, inductors, capacitors or diodes with the same type, or replacing a radio component with another assessed component of equivalent function, may be treated as unrelated to the criteria. Check with a designated lab before you change anything
RRA’s FAQ states that CF and SD cards used to expand the memory of digital devices are not subject to conformity assessment
Source: RRA FAQ (scope)
What about importing evaluation boards or samples?
Equipment for testing, research and development can be exempted within set quantities. For imports, apply for the requirement exemption through the Korea Customs Service UNI-PASS system
Source: RRA FAQ (exemptions)
Official sources
All opened and checked on October 7, 2026. Most are in Korean