|
|
|
| * 현재위치 : HOME >> 고객지원 >> 웹 프로모션 |
|
 |
|
이번 프로모션에서는 NCX2200GM, 74LVC244A, NTS0102GF, NX3DV221GM 등 저희 (주)승전이 엄선한 NXP 로직제품을 소개합니다.
제품에 대한 견적을 원하실 경우 해당 Part Number를 클릭하여 주시기 바랍니다.
|
| NCX2200GM |
 Datasheet(PDF)
|
|
|
|
The NCX2200 provides a single low voltage low power comparator.
The NCX2200 has a very low supply current of 6 μA and is guaranteed to operate at a low
voltage of 1.3 V and is fully operational up to 5.5 V which makes this device convenient for
use in both 3.0 V and 5.0 V systems.
|
|
| Part Number |
| Product status |
| Package |
| Packing |
|
|
| NCX2200GF3,132  |
| Volume production |
| SOT891 (XSON6) |
| Tape reel smd |
|
|
| NCX2200GM,132 |
| Volume production |
| SOT886 (XSON6) |
| Tape reel smd |
|
|
| NCX2200GM,115 |
| Volume production |
| SOT886 |
| Tape reel smd |
|
|
| NCX2200GW,125 |
| Volume production |
| SOT353 (SOT353) |
| Tape reel smd |
|
|
| 74LVC244A |
Datasheet(PDF)
|
|
|
|
The 74LVC244A; 74LVCH244A is an octal non-inverting buffer/line driver with 3-state
outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE.
A HIGH on nOE causes the outputs to assume a high-impedance OFF-state.
Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower input rise
and fall times.
Inputs can be driven from either 3.3 V or 5.0 V devices. In 3-state operation, outputs can
handle 5 V. These features allow the use of these devices as translators in a mixed
3.3 V and 5 V environment.
The 74LVCH244A bus hold on data inputs eliminates the need for external pull-up
resistors to hold unused inputs.
|
|
| Part Number |
| Product status |
| Package |
| Packing |
|
|
| 74LVC244ABQ,115 |
| Volume production |
| SOT764-1 (DHVQFN20) |
| Reel, SMD, 7" |
|
|
| 74LVC244ABX,115 |
| Volume production |
| SOT1045-1 (DHXQFN20U) |
| Reel, SMD, 7" |
|
|
| 74LVC244AD,112 |
| Volume production |
| SOT163-1 (SO20) |
| Tube |
|
|
| 74LVC244AD,118 |
| Volume production |
| SOT163-1 (SO20) |
| Tape reel smd |
|
|
| 74LVC244ADB,112 |
| Volume production |
| SOT339-1 (SSOP20) |
| Tube |
|
|
| 74LVC244ADB,118 |
| Volume production |
| SOT339-1 (SSOP20) |
| Reel, SMD, 13" |
|
|
| 74LVC244APW,112 |
| Volume production |
| SOT360-1 (TSSOP20) |
| Tube |
|
|
| 74LVC244APW,118 |
| Volume production |
| SOT360-1 (TSSOP20) |
| Reel, SMD, 13" |
|
|
| NTS0102GF |
Datasheet(PDF)
|
|
|
|
The NTS0102 is a 2-bit, dual supply translating transceiver with auto direction sensing,
that enables bidirectional voltage level translation. It features two 2-bit input-output ports
(An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)
can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at
any voltage between 2.3 V and 5.5 V, making the device suitable for translating between
any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to
VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to
assume a high-impedance OFF-state. This device is fully specified for partial power-down
applications using IOFF. The IOFF circuitry disables the output, preventing the damaging
backflow current through the device when it is powered down.
|
|
| Part Number |
| Product status |
| Package |
| Packing |
|
|
| NTS0102DP,125 |
| Volume production |
| SOT505-2 (TSSOP8) |
| Reel |
|
|
| NTS0102GD,125 |
| Volume production |
| SOT996-2 (XSON8U) |
| Reel |
|
|
| NTS0102GF,115 |
| Volume production |
| SOT1089 (XSON8) |
| Reel, SMD, 7" |
|
|
| NTS0102GT,115 |
| Volume production |
| SOT833-1 (XSON8) |
| Reel, SMD, 7" |
|
|
| NTS0102GU,115 |
| Development |
| SOT1160 |
| Reel, SMD, 7" |
|
|
| NX3DV221GM |
Datasheet(PDF)
|
|
|
|
The NX3DV221 is a high-bandwidth switch designed for the switching of high-speed USB
2.0 signals in handset and consumer applications, such as cell phones, digital cameras,
and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1
GHz) of this switch allows signal to pass with minimum edge and phase distortion. The
device multiplexes differential outputs from a USB host device to one of two
corresponding outputs. The switch is bidirectional and offers little or no attenuation of the
high-speed signals at the outputs. It is designed for low bit-to-bit skew and high
channel-to-channel noise isolation, and is compatible with various standards, such as
high-speed USB 2.0 (480 Mbps).
|
|
| Part Number |
| Product status |
| Package |
| Packing |
|
|
| NX3DV221GM,115 |
| Volume production |
| SOT1049-2 (XQFN10U) |
| Reel, SMD, 7" |
|
|
| NX3DV221GM,132 |
| Discontinued
(Replacement product) |
| SOT1049-2 (XQFN10U) |
| |
|
|
|
|
|
|
|
203-1, Jangsa-Dong, Chongro-Ku, Seoul, 110-430, Korea.
TEL:02)2274-6801 FAX:02)2268-5696
Copyright 1999-2012 ⓒ SEUNGJUN Co., Ltd. All Rights Reserved
|
|
|
|
|
|
|
|
| | |
